Tapered Roller Bearings

This conical geometry creates a linear contact patch which permits greater loads to be carried than with spherical (ball) bearings, which have point contact. The geometry means that the tangential speeds of the surfaces of each of the rollers are the same as their raceways along the whole length of the contact patch and no differential scrubbing occurs.

The U type tapered roller bearings are an exception within the conventional tapered roller bearings since this is a compact unit type that includes the grease and is pre-regulated without having to install an opposite bearing. Furthermore, they have a flange on the outer ring that is fastened axially in the application once the bearing is mounted.Two rows of rollers give these bearings load capacities over five times higher than comparably sized tapered-roller bearings. One-Way Locking Needle-Roller Bearing Clutches. The needles in these bearings roll freely in one direction, but lock to transmit torque when the rotation of the shaft is reversed.

Bearing Number	Bore Dia	Outer DIa	Width	Size
FAG 32021-X-N11CA tapered roller bearings	2.82 in	170000 lb	0.0063 in	22226
95,25 mm x 152,4 mm x 36,322 mm FAG K594-A-592-A tapered roller bearings	1 Piece Solid	Metric	8483.20.40.80	No Pilot
140 mm x 250 mm x 42 mm FAG 30228-XL tapered roller bearings	0.015 kg	18 mm	0.1	0.25 m/s
41,275 mm x 87,313 mm x 30,886 mm FAG K3585-3525 tapered roller bearings	Mounted Units &	0.0	M06110	0800675262952
150 mm x 270 mm x 45 mm FAG 30230-XL tapered roller bearings	CONSOLIDATED BEARING	N/A	B04311	0.0
260 mm x 400 mm x 87 mm FAG 32052-X tapered roller bearings	C0-Medium	No	Yes	45MM Bore; 100MM Out
110 mm x 180 mm x 46 mm FAG KJHM522649-JHM522610 tapered roller bearings	NTN	N/A	Mounted Units &	0.0
55 mm x 100 mm x 25 mm FAG 32211-A tapered roller bearings	Cam Follower and Tra	0.787 Inch \| 20 Mill	CONSOLIDATED BEARING	Cam Follower
FAG 31330-X-N11CA-A180-230 tapered roller bearings	31171531	B04270	1 Rib Outer Ring	Metric
75,987 mm x 131,975 mm x 39 mm FAG KHM215249-HM215210 tapered roller bearings	5.53 Inch \| 140.462	M06288	18.16	Yes
101,6 mm x 168,275 mm x 41,275 mm ISB 687/672 tapered roller bearings	No	2 Rib Outer Ring \| S	N/A	4.717
17 mm x 40 mm x 12 mm ISB 30203 tapered roller bearings	84833080	0.0	ISOSTATIC INDUSTRIES	1/2" Nominal Bo